SEARCH ENGINE > RESULTS

Result : 8 pump(s).

• 

  SI 1102 | MONOBLOC CONDENSATE REMOVAL PUMPS

  for up to 2.8 tons (33.6kBtu – 10kW) air conditioning units

  Benefits :

  • Extremely silent operation
  • Complete installation kit
  • Small size
  • Reduced maintenance: the absence of a filter reduces clogging
  • Fast connection
  • Reversible bracket

  

• 

  SI 1200 | MONOBLOC CONDENSATE REMOVAL PUMPS

  for up to up to 5.6 tons (67.2kBtu – 20kW) air conditioning units

  Benefits :

  • Extremely silent operation
  • Complete installation kit
  • Small size
  • Reduced maintenance: the absence of a filter reduces clogging
  • Fast connection
  • Reversible bracket

  

• 

  Delta pack | READY TO FIT ASSEMBLY

  for wall-mounted air conditioners up to 10 kW

  Benefits :

  • Easy to install:
    * 1 one-piece elbow
    * Clip-on system: duct can be cut without trimming edges
    * More room for routing insulated copper tubing (max recommended pipe size: (5/8") – (3/8") insulated)
    * Reversible mounting (right & left)
    * Easy electrical connection with removable plug
  • Low noise:
    * Low noise installation: the pump is mounted directly on the wall, on a specifically designed metal bracket supported on flexible, vibration dampening rubber pads
    * Low noise pump: SI1102 pump is < 30dBA
  • Low maintenance design:
    * Pump with 1/10” ID section and equipped with a duckbill valve to allow small particles to pass through
    * Specific condensate inlet:
    - decanter for heavy & metallic parts
    - comb for long particles (hairs, copper wires, etc)
    - no filter = no clogging
  • Attractive design:
    * No visible edge to edge connection between duct and elbow
    * One-piece structure
    * Special rubber seal to fit any wall-split shape
  • P54 pump: the pump is protected against water drops (e.g.: condensation on the tubing)
  • Lowered installation: less water inside the condensate inlet tube: fewer microbes, germs, etc.

  

• 

  SI 3100 | MINI CONDENSATE REMOVAL PUMPS

  for up to 2.8 tons (33.6kBtu – 10kW) air conditioning units

  Benefits :

  • Minimal size
  • Reduced maintenance
  • Simple and easy slide assembly
  • No fine mesh filter
  • Comb for trapping large particles
  • Reversible pump

  

• 

  SI 3200 | MINI CONDENSATE REMOVAL PUMPS

  for up to 5.6 tons (67.2kBtu – 20kW) air conditioning units

  Benefits :

  • Minimal size
  • Reduced maintenance
  • Simple and easy slide assembly
  • No fine mesh filter
  • Comb for trapping large particles
  • Reversible pump mounting

  

• 

  SI 1730 | CONDENSATE REMOVAL PUMP

  for air conditioners up to 8.5 tons (102kBtu – 30kW)

  Benefits :

  • Small size
  • High flow rate
  • Fast electrical connection by multi-pin connector

  

• 

  SI 1805 | ONE-PIECE CENTRIFUGAL TANK PUMP

  For gas furnaces, gas condensing boilers, air conditioning units and refrigerated display cabinets

  Benefits :

  • High discharge head
  • Compact
  • High flow rate
  • Thermal protection (overheating) 266°F
  • Integrated check valve

  

• 

  SI 1820 | ONE-PIECE CENTRIFUGAL TANK PUMP

  For gas furnaces, gas condensing boilers, air conditioning units and refrigerated display cabinets

  Benefits :

  • High discharge head
  • Compact
  • High flow rate
  • Thermal protection (overheating) 266°F
  • Integrated check valve

  

Back to form